Tapes

PHB5100B all acrylic construction provides the necessary durability and strength for extreme applications. As a pressure-sensitive 100% closed cell acrylic foam tape, it is designed to provide a superior bond between many different substrates, especially low surface energy powder coated paints, metals and plastics. The foam creates a durable shield as it bonds and compensates for differential thermal expansion or contractions. Liquids can be sealed in or out. Cost savings are possible with labor and the final product may be lighter, quieter and more efficient.

Auto trim attachment, skin to frame assembly, window and door, signage, graphics, furniture, appliances and other OEM, aerospace, marine and construction applications to replace mechanical fasteners, rivets, screws and welds. Results in sleeker, seamless appearance of products that are lighter and more efficient. Also reduces labor and material costs.

PHB5100W is a pressure-sensitive acrylic closed cell foam tape designed to provide a superior bond between a wide variety of substrates, especially low surface energy powder coated paints, metals and plastics. Exhibits a highly uniform high-tack acrylic adhesive on both sides. Tape is formulated to withstand weathering, moisture and wide temperature ranges without losing adhesion power.

Auto trim attachment, skin to frame assembly, window and door, signage, graphics, furniture, appliances and other OEM, aerospace, marine and construction applications to replace mechanical fasteners, rivets, screws and welds. Results in sleeker, seamless appearance of products that are lighter and more efficient. Also reduces labor and material costs.

PHB5100C all acrylic construction provides the necessary durability and strength for extreme applications. As a pressure-sensitive 100% closed cell acrylic foam tape, it is designed to provide a superior bond between many different substrates, including glass and other clear materials. The foam creates a durable shield as it bonds and compensates for differential thermal expansion or contractions. Liquids can be sealed in or out. Cost savings are possible with labor and the final product may be lighter, quieter and more efficient.

Shower door assembly, window and door, signage, graphics, appliances and other OEM applications to replace mechanical fasteners, rivets, screws and welds. Results in sleeker, seamless appearance of products that are lighter and more efficient. Also reduces labor and material costs.

PHB1000 is a pressure-sensitive, water clear, solid acrylic tape designed to provide a superior bond between a wide variety of substrates, including glass and other clear materials. Possesses a uniform high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates. Tape is formulated to withstand weathering, moisture and wide temperature ranges without losing adhesion power.

Auto trim attachment, signage, graphics, skin to frame assembly, furniture, appliances and other OEM and construction applications to replace mechanical fasteners and welds.

PHB2000 is a pressure-sensitive, gray, foamed core, acrylic tape designed to provide a superior bond between a wide variety of substrates. Possesses a uniform high-tack acrylic adhesive on both surfaces and will bond to most clean, dry, oil-free substrates. Tape is formulated to withstand weathering, moisture and wide temperature ranges without losing adhesion power.

Window muntin bar attachment, auto trim attachment, signage, graphics, skin to frame assembly, furniture, appliances and other OEM and construction applications to replace mechanical fasteners and welds.

PBTP-20 tape is self wound and coated on one side with an acrylic adhesive. An extremely economical alternative to traditional plastic zippers in the manufacture of plastic resealable bags. Half the price of zippers and no special equipment is needed.

PBTP-20 is used with adhesive closure bags. Low slip or no slip films are recommended. Corona treatment will improve adhesion. The tape can be easily cut with a hot knife. Pres-On can supply a liner to place over the exposed adhesive for applications requiring a liner.

PB200-107C is a laminating film consisting of a permanent laminating adhesive on the unwind side and a removable adhesive on the user side. The permanent side is an aggressive acrylic adhesive that adheres to a large variety of foams, corks, felts and films. The removable side has an acrylic pressure sensitive adhesive that does not build over time. It will hold moderate loads and ultimately removes cleanly from most surfaces up to six months, one year depending on the application. It has a low initial grab, which allows the tape to be repositioned. The acrylic adhesive provides excellent environmental resistance and aging properties. It will easily hold 1/2 lb per every square inch of tape used.

Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results. Pres-On does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose desired in any given situation.

PB200-147C is a laminating film consisting of a permanent laminating adhesive on the unwind side and a removable adhesive on the user side. The permanent side is an aggressive rubber adhesive that adheres to a large variety of foams, corks, felts and films. The ultra-removable side has an acrylic pressure sensitive adhesive that does not build over time. It will ultimately remove cleanly from most surfaces up to six months, one year depending on the application. It has a low initial grab, which allows for reposition ability. The acrylic adhesive provides excellent environmental resistance and aging properties.

Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results. Pres-On does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose desired in any given situation.

PBCMF-1.5 is a removable acrylic pressure sensitive adhesive coated on a 1.5 mil polyester film. The adhesive does not build over time and will ultimately remove cleanly from most surfaces up to 6 months — 1 year depending on the application. It has a low initial grab, which allows for reposition ability. The acrylic adhesive provides excellent environmental resistance and aging properties.

Thoroughly clean contact surface before use. Once tape has been applied, it cannot be removed and reused. Therefore, position tape carefully, assuring that it is in contact with all surfaces. If tape is misaligned, remove used unit, discard and repeat application with new unit. Test product for system compatibility as individual application conditions can impact results. Pres-On does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose desired in any given situation.

Pres-On Performa™ labels help manufacturers identify each piece of glass throughout production. A premium performance high-temperature ultra removable label stock. The acrylic adhesive removes cleanly and easily from glass after long-term exposure to high temperature processing (autoclave). Thoroughly tested against micro-thin glass coatings. Label can reliably be placed on hot, post tempered glass and be cleanly removed after extended period of time.

All types of glass manufacturing operations would benefit from this barcode-able label. Applications include flat glass, Insulated glass, post tempered* glass. Label accepts most types of printing. Engineered for long-term adhesion throughout every step in the supply chain. Label can be easily and reliably removed residue-free by consumer. (*Not for use during tempering process.)